Find upcoming Classic Car events in your area |
Ask the Experts, chat with members, ask questions, find answers |
Tell us your stories & the journeys your cars have made |
Wanted Cars Find your Dream Car here! Sell your car for FREE! |
|
Questions and Answers - Classic Car Community
Q: |
1966 Chev Impala For Sale 1966 Chevrolet IMPALA |
January 8th, 2023 05:54:54 pm, posted by Penny Barker |
I am having a problem with a question. It is not being accepted by my server. If you get this message, please contact me at:
penny.barker22@yahoo.com; or leave a voice mail message at my phone 770...
|
|
|
|
Q: |
Help finding the wiring connections for the indash clock 1965 Chevrolet BEL AIR |
January 18th, 2022 01:09:33 pm, posted by Robert Baxter |
I recently acquired this Bel Air and there were a number of wiring modifications behind the dash. I have been able to clean most of this up with the exception of the connectors for the indash clock....
|
|
|
|
Q: |
Car Clubs near by? 1949 Chevrolet 3100 |
December 5th, 2021 01:39:38 pm, posted by ROB RICKERT |
Looking for a classic car club near Fairfax?...
|
|
|
|
Q: |
Car Clubs near by? 1949 Chevrolet 3100 |
December 5th, 2021 01:39:34 pm, posted by ROB RICKERT |
Looking for a classic car club near Fairfax?...
|
|
|
|
Q: |
radiator removal and replacement 1950 Chevrolet 750 |
September 12th, 2021 04:34:18 pm, posted by Mel Epps |
I have to replace the radiator on my 1950 Chevy Styleline Delux 6 cyl 235 engine with Powerglide. I have removed all nuts & bolt and pitcock, loosened the upper hose and loosened the two fasteners o...
|
|
|
|
Q: |
radiator removal and replacement 1950 Chevrolet STYLELINE DELUXE |
September 12th, 2021 04:27:36 pm, posted by Mel Epps |
I need to replace the radiator in my 1950 Chevy Styleline Delux 6 cyl 235 engine Powerglide. I have removed all bolts and pitcock, disconnected the upper hose and loosened both straps on the lower ...
|
|
|
|
Q: |
Front Fenders 1974 Chevrolet MONTE CARLO |
July 22nd, 2021 04:10:03 pm, posted by Danny Morton |
How do I list my front fenders for sale?...
|
|
|
|
Q: |
A good mechanic that likes classics and is a problem solver 1950 Chevrolet 3100 |
July 14th, 2021 11:01:09 pm, posted by Mark Hay |
I have a 1950 chevy 3100 pickup - new crate 350, auto, power steering, breaks, etc. that runs well but has several "modest issues" that need attention. CAn anyone suggest a good mechanic that likes w...
|
A: |
What region? |
July 19th, 2021 12:28:54 am, posted by Chester County Antique Car Club |
|
|
|
|
|
Q: |
Trying to Locate Camaro 1969 Chevrolet CAMARO SS |
June 2nd, 2021 12:01:35 pm, posted by Rick Patterson |
I bought this car new in 1970 and later traded it to a dealership for another car probably back in 1977. I was married in the Camaro and 49 years ago and now I would like to relocate it for our 50th...
|
|
|
|
Q: |
Trying to Locate Camaro 1969 Chevrolet CAMARO SS |
June 2nd, 2021 12:01:02 pm, posted by Rick Patterson |
I bought this car new in 1970 and later traded it to a dealership for another car probably back in 1977. I was married in the Camaro and 49 years ago and now I would like to relocate it for our 50th...
|
|
|
|
Q: |
Searching for a special car for our wedding! HELP! 1967 Chevrolet IMPALA |
May 4th, 2021 12:22:42 am, posted by Angela Mahorney |
A few years ago I met a man from near Georgetown Ky who had a ‘67 Impala that was decked out to match the one on tv’s Supernatural. Weaponry in the truck, squeak of the doors, etc. I loved taking...
|
|
|
|
Q: |
1934 Chevy Master Parts 1934 Chevrolet MASTER |
December 22nd, 2020 02:43:20 pm, posted by Tom Albrecht |
Would anyone know where I can find window cranks and door handles for a 1934 Chevy Master?...
|
|
|
|
Q: |
Looking for a car for an afternoon 1966 Chevrolet IMPALA |
October 5th, 2020 11:02:51 am, posted by Andrea Smith |
I am looking for a white 1966 Chevy Impala to use for a photo session for an hour on Oct. 24th in Northwest Ohio near Fremont. I am willing to pay for the cost of mileage and a small fee for time. ...
|
|
|
|
Q: |
6 volt AC 1953 Chevrolet 3100 |
August 9th, 2020 02:30:05 pm, posted by Miguel Ruelas |
Hello Everyone,
Just purchased a 1953 Chevy 3100 with what I believe is a 1950 engine.
I was thinking about keeping the truck as original as possible, so 6 volt.
Where can I find a 6 volt AC syste...
|
A: |
Part catalogs |
October 31st, 2020 07:56:31 am, posted by Kenny Norris |
|
|
|
|
|
Q: |
My new right side cab to bed rail chrome... 1965 Chevrolet EL CAMINO |
June 23rd, 2020 08:43:43 pm, posted by William R. Codwise |
My new right side cab to bed rail chrome does not match factory curve! Anybody got a fix?...
|
|
|
|
Q: |
Want a new glass top? 1985 Chevrolet CORVETTE (SILVER ANNIV) |
February 15th, 2020 07:54:00 am, posted by John L Church |
|
|
Q: |
El Camino 1966 Chevrolet EL CAMINO |
January 24th, 2020 10:37:29 am, posted by Dave Beighle |
We just pulled the body off of our 66 elco. Frame is in bad shape. Looking to buy a frame for this vehicle. Any help would be greatly appreciated. TIA. Dave...
|
|
|
|
Q: |
64 el co rear body to frame cushine bolts 1954 Chevrolet EL CAMINO |
January 17th, 2020 10:48:39 pm, posted by ron brandelli |
need info on extracting broken rear bed cushine bolts after nut weld . need access to cage nut inside could bore from rear to apply crowoil?...
|
|
|
|
Q: |
Car Club name availability 1979 Chevrolet EL CAMINO CLASSIC |
October 3rd, 2019 01:00:43 am, posted by Keith Barrera |
How do I register or check if name is even available? STRAIGHT CLASS CAR CLUB...
|
|
|
|
Q: |
Any Help would be appreciated 1971 Chevrolet MONTE CARLO |
September 13th, 2019 09:51:08 pm, posted by Tracey Hasan |
Good evening .
I am reaching out to you to ask if you could possibly help me find a car my brother once owned early 80’s or earlier. I want to do something special by finding this car even jus...
|
|
|
|
Q: |
Electrical issue... 1955 Chevrolet BEL AIR TOWNSMAN |
August 7th, 2019 09:00:26 am, posted by Larry Akers |
Hello all, I have a 1955 Bel Air Townsman 4 door wagon. It has a 2003 4.3L Vortec with the 4L60E transmission. I have owned this car for about 15 years and driven it in this current configuration a...
|
|
|
|
Q: |
Powerglide transmission and other parts 1969 Chevrolet CAMARO |
July 7th, 2019 01:09:30 pm, posted by Art Molseed |
I recently sold my 1969 Camaro (base model) at the Mecum Auction in Portland and have some parts that I would like to donate to an organization or person that could use them. They include the origin...
|
A: |
Location? |
July 7th, 2019 10:30:37 pm, posted by Gary Darrar |
|
|
A: |
|
|
|
|
Q: |
1934 Chev. Roadster 1934 Chevrolet 1 1/2 TON |
June 9th, 2019 04:36:51 pm, posted by Harold Hede |
My 1934 Chevy 6 cylinder valve in head engine has coolant leaking into the oil. My thought is the head gasket is leaking. Any precautions to lifting off the head with exhaust manifold, carburetor etc...
|
|
|
|
Q: |
Bucket seats 1949 Chevrolet FLEETLINE DELUXE |
June 4th, 2019 05:56:57 pm, posted by Eugene Taylor |
just recently acquired a 49 Chevy with mis-matched bucket seats. What would be a good set to use in there? Suggestions?...
|
|
|
|
Q: |
Fuel pump relay 1995 Chevrolet CORVETTE |
May 21st, 2019 10:39:21 am, posted by Doug Rains |
Where is the fuel pump located on my c4 ragtop lt1 I cant believe I am having so much trouble finding the location Ive got behind the glove box no glove box inside left and right kick panel no ki...
|
A: |
fuel relay |
May 21st, 2019 01:22:57 pm, posted by Gary Darrar |
|
|
|
|
|
Q: |
How to post. 1974 Chevrolet MONTE CARLO S |
April 9th, 2019 12:46:12 pm, posted by Jayna Custer |
How do I post pictures and try to sell on this site? Cost associated or fees charged?...
|
|
|
|
Q: |
Is there a need for car club w-storage, lounge.... 1967 Chevrolet CHEVELLE SS396 |
April 2nd, 2019 07:19:48 pm, posted by Jaime Costanzo |
I am asking your opinion if there is a desire to belong to a classic car club with storage, showcasing, work bay w/lift, wash bay, lounge, kitchenette, climate controlled beautiful building with grou...
|
|
|
|
Q: |
help......please ! 1985 Chevrolet EL CAMINO |
March 26th, 2019 08:05:38 pm, posted by Sami Price |
Where is the compressor switch located under the hood? ...
|
A: |
A/C |
April 11th, 2019 08:14:11 am, posted by David Huisken |
|
|
|
|
|
Q: |
unable to add a car 1950 Chevrolet STYLELINE DELUXE |
December 8th, 2018 10:52:19 am, posted by Paul Villemarette |
I complete the add my car online form, click add, activity indicator spins then returns to my account with no my cars indicated. How do I fix this?...
|
|
|
|
Q: |
Rust 1956 Chevrolet BEL AIR |
August 27th, 2018 08:04:11 am, posted by John Gonda |
My ‘56 has a couple coats of paint, looks great; but I have a few rust spots and bubbles. Looking for advice on how to deal with these issues short of a complete repaint....
|
|
|
|
Q: |
I am restoring a 1978 el camino and tryi... 1978 Chevrolet EL CAMINO |
August 14th, 2018 02:16:12 am, posted by kevin detwiler |
I am restoring a 1978 el camino and trying to keep original, motor is a v6 231 I can not find a y pipe original part number 93945 AP would like to have one made from stainless does any one know of a ...
|
A: |
y pipe |
August 14th, 2018 10:27:25 am, posted by Gary Darrar |
|
|
A: |
|
|
|
|
Q: |
my Erngine swap 1968 Chevrolet 1/2 TON |
August 1st, 2018 08:12:23 pm, posted by michael parola |
i am going to pull this burnt out abused 283 engine and install a 454 with a turbo 400 trans hoping to talk to people that know which problems i will come across or will it be pretty simple ??????...
|
|
|
|
Q: |
Hello! I don’t know if this question is ... 1957 Chevrolet 1 1/2 TON |
July 24th, 2018 03:10:05 pm, posted by Sarah Neumann |
Hello! I don’t know if this question is appropriate or not but I was wondering if anybody out there could help me out. I would love to be able to have my mom get a ride in a 57 Chevy or any Chevy c...
|
|
|
|
Q: |
HELP 68 el-camino 1968 Chevrolet EL CAMINO SS |
July 5th, 2018 07:46:57 pm, posted by Greg Mitchell |
barn find 30yrs ago. I have what I was told many yrs ago, is a dealer demo. this car-truck, has multiple packages on it. I have the protecto plate, and some papers. it has 4642 miles on it. I have be...
|
A: |
68 El Camino |
July 6th, 2018 06:46:33 pm, posted by Gary Darrar |
|
|
|
|
|
Q: |
Shopping Local Mechanics (Columbia SC) 1964 Chevrolet C10 |
May 29th, 2018 11:26:33 am, posted by Steve Hartwig |
Looking for suggestions from the community regarding your local (Columbia & surrounding area) go to mechanic/speed shop for high performance classic vehicles (GM). My current go to is awesome just sh...
|
|
|
|
Q: |
Shopping Local Mechanics (Columbia SC) 1964 Chevrolet C10 |
May 29th, 2018 11:25:49 am, posted by Steve Hartwig |
Looking for suggestions from the community regarding your local (Columbia & surrounding area) go to mechanic/speed shop for high performance classic vehicles (GM). My current go to is awesome just sh...
|
|
|
|
Q: |
Shopping Local Mechanics (Columbia SC) 1964 Chevrolet C10 |
May 29th, 2018 11:24:53 am, posted by Steve Hartwig |
Looking for suggestions from the community regarding your local (Columbia & surrounding area) go to mechanic/speed shop for high performance classic vehicles (GM). My current go to is awesome just sh...
|
|
|
|
Q: |
Electrical 1964 Chevrolet MALIBU SS |
May 26th, 2018 11:20:13 pm, posted by Patrick Burg |
I have no brake lights when I step on my brake pedal my running lights come on also when I step on the pedal my decoded digital dash goes dim have a short somewhere and when I unplug the column harne...
|
|
|
|
Q: |
Electrical 1964 Chevrolet MALIBU SS |
May 26th, 2018 11:19:29 pm, posted by Patrick Burg |
I have no brake lights when I step on my brake pedal my running lights come on also when I step on the pedal my decoded digital dash goes dim have a short somewhere and when I unplug the column harne...
|
|
|
|
Q: |
Electrical 1964 Chevrolet MALIBU SS |
May 26th, 2018 11:18:45 pm, posted by Patrick Burg |
I have no brake lights when I step on my brake pedal my running lights come on also when I step on the pedal my decoded digital dash goes dim have a short somewhere and when I unplug the column harne...
|
|
|
|
Q: |
Electrical 1964 Chevrolet MALIBU SS |
May 26th, 2018 11:18:01 pm, posted by Patrick Burg |
I have no brake lights when I step on my brake pedal my running lights come on also when I step on the pedal my decoded digital dash goes dim have a short somewhere and when I unplug the column harne...
|
|
|
|
Q: |
Electrical 1964 Chevrolet MALIBU SS |
May 26th, 2018 11:17:17 pm, posted by Patrick Burg |
I have no brake lights when I step on my brake pedal my running lights come on also when I step on the pedal my decoded digital dash goes dim have a short somewhere and when I unplug the column harne...
|
|
|
|
Q: |
Electrical 1964 Chevrolet MALIBU SS |
May 26th, 2018 11:16:21 pm, posted by Patrick Burg |
I have no brake lights when I step on my brake pedal my running lights come on also when I step on the pedal my decoded digital dash goes dim have a short somewhere and when I unplug the column harne...
|
|
|
|
Q: |
I need help 1962 Chevrolet CORVAIR |
April 2nd, 2018 02:06:11 pm, posted by Dorothy Malucci |
MY dear lewis passed away in January of this year He loved antique cars lost the keys to this 19thank you62 corvair. Is there anyone you know of in or near Whittier ca who can make a new car key repl...
|
|
|
|
Q: |
Parts search 1978 Chevrolet EL CAMINO |
March 7th, 2018 07:46:26 pm, posted by Jerry Johnson |
Looking for rubber bumper replacement. Anyone know where I can find them.
you can mail us at michaeladesina11@gmail.com so we can give you the price and listing
...
|
|
|
|
Q: |
Best place to sell 1991 Chevrolet CORVETTE |
March 5th, 2018 09:56:19 am, posted by TJ Moore |
Where is the best place to sell this car?
I am ready to part with it.
She runs great & looks even better.
Please email me at cruelladville@gmail.com...
|
|
|
|
Q: |
Classic Car 2005 Chevrolet 750 |
January 23rd, 2018 11:46:28 am, posted by Bryan Ramirez Hernandez |
Hello,
My girlfriend is a huge fan of classic cars and I wanted to surprise her this February 14th by taking her out on a date in a classic car. Is there anyone in the Omaha area that is willing ...
|
|
|
|
Q: |
CLASSIC CAR PARTS RETAILERS 1955 Chevrolet BEL AIR |
October 26th, 2017 07:43:04 am, posted by EDWARD J RAYMOND |
MY 55 CHEVY was restored about 20 yrs ago and i need to do some restoring now id like recommendations regarding best parts companies to order from for quality and pricing
...
|
|
|
|
Q: |
Advice on 1975 el Camino (standard)? 1975 Chevrolet EL CAMINO |
October 3rd, 2017 05:18:00 pm, posted by Dan Wilcox |
Hello everyone I am looking for some advice on buying a 1975 Standard. Not so much for restoration but as a decently reliable daily driver that I can teach my kid basic mechanics stuff on.
Here th...
|
|
|
|
Q: |
El Camino tire size 1979 Chevrolet EL CAMINO |
August 10th, 2017 04:48:13 pm, posted by tom Krouth |
GM put 14 inch wheels on all 1979 El Caminos according to GM historical files. I would like to put a set of 1978 thru 1982 15 inch corvette rims and tires on my 1979. Any body have any thoughts on ...
|
|
|
|
Q: |
Parade 1957 Chevrolet 1 1/2 TON |
July 19th, 2017 01:35:51 pm, posted by Laura Ratke |
Hello Classic Car Community!
I manage a small independent optometry clinic in Edmonton and our community is turning 100 this year and they will be hosting a parade and some festivities. We will be ...
|
|
|
|
Q: |
Veterans fund raiser - Car Show 1972 Chevrolet CHEVELLE |
May 24th, 2017 12:36:23 pm, posted by Kimberly Scott |
So I am in need of some thoughts from everyone on here. I recently just found this site and cant wait to meet up at some of the car shows in FL. GA. AL. Area. I am located in the center of FL, in a t...
|
|
|
|
Q: |
carb change 1981 Chevrolet EL CAMINO CLASSIC |
May 17th, 2017 05:09:20 pm, posted by George Smith |
I have the 229 ci v6 it has ecm. going to remove the ecm what carb can I use to replace the existing carb. ...
|
|
|
|
Q: |
onthecheap 1950 Chevrolet FLEETLINE DELUXE |
December 9th, 2016 03:34:57 pm, posted by Darrell Danford |
I was given a 1950 fleetline and a 1989 chevy caprice. So I was wondering the obvious, will the fleetline body go on the caprice frame? I am a welder so working on the frame doesn't scare me but ...
|
|
|
|
Q: |
Classic car clubs- nova? 1969 Chevrolet 1 1/2 TON |
November 14th, 2016 10:54:14 am, posted by Kali Wealch |
HI I was wondering if anyone knew of classic car clubs around the south east parts of Michigan? I am in the automotive program for college and have found the love for Novas and I would like to purcha...
|
|
|
|
Q: |
Trying to find my grandfathers 1930 Chevrolet and 1926 Model TT 1930 Chevrolet SEDAN |
October 19th, 2016 06:14:23 pm, posted by Michael Alexander |
My name is Michael Alexander and I am trying to find out information about the car, and truck my grandfather J.B. Alexander sold in either 1990 or 1991, to a funeral home director in Birmingham MI an...
|
|
|
|
Q: |
Trying to find my grandfathers 1930 Chevrolet and 1926 Model TT 1930 Chevrolet SEDAN |
October 19th, 2016 06:14:16 pm, posted by Michael Alexander |
My name is Michael Alexander and I am trying to find out information about the car, and truck my grandfather J.B. Alexander sold in either 1990 or 1991, to a funeral home director in Birmingham MI an...
|
|
|
|
Q: |
Selling 1957 Chevy 4400 Flatbed Truck 1957 Chevrolet ANTIQUE |
July 28th, 2016 06:18:28 pm, posted by Cheryl Rich |
I have been given the job to sell my uncle's cars.
A 1969 Black on Black Riv
And a...
1957 Chevy 4400 Flatbed.
Both of these cars do run
But I need some help pricing the 1957 and I'm hoping to g...
|
|
|
|
Q: |
new brakes dont release 1982 Chevrolet C10 |
July 24th, 2016 10:13:39 am, posted by mike simard |
all my brake parts are new including a few lines everything has been vacumm bled but when I step on the pedal my front calipers lock up and don't release until I crack the bleeder valve I am wonderin...
|
|
|
|
Q: |
Need help locating 57 chevrolet 1957 Chevrolet BEL AIR |
July 19th, 2016 05:32:54 pm, posted by Duane Jensen |
I need help locating a 1957 chevrolet bel air. Everyone wants a convertible and so do I. I may have to settle for a 2 door hardtop. Any one have any leads or connections?...
|
|
|
|
Q: |
Front Fender Emblem Location 1969 Chevrolet EL CAMINO SS396 |
July 18th, 2016 04:23:08 pm, posted by Bill Watkins |
Have not been able to find the exact location for the SS 396 emblems on the front fender in the assembly manual. Have been told by various parts suppliers that the 69 model is different from the 70...
|
|
|
|
Q: |
Need Apprasier 1971 Chevrolet CORVETTE |
July 1st, 2016 06:45:29 am, posted by Monica Tilton |
Looking to find an Apprasier in the Bay Area that can tell us what our car is worth. We are ready to sell, but have no idea of value. ...
|
|
|
|
Q: |
Needing to sell a couple of cars 1981 Chevrolet CORVETTE |
June 29th, 2016 07:06:55 am, posted by Tyler Thomas |
I have a couple of cars that were my dad's that I need to sell. They both are in pieces (because he was in the process of restoring) but have all the parts. Neither one of them run probably because t...
|
|
|
|
Q: |
trying to locate a 1960 Chev Impala 1960 Chevrolet IMPALA |
June 28th, 2016 11:08:09 am, posted by Debbie Wellman |
I'm trying to find the 1960 Chevy Impala I once owned. Came from MN and in 2014 it was in Missouri and in 2015 it was licensed/titled in FL. Last 4 of the VIN 2464. That's all I've been able to fin...
|
|
|
|
Q: |
1970 350 auto 1970 Chevrolet CAMARO |
June 16th, 2016 12:44:44 pm, posted by Peter J Caiola |
When the car warms up it begins to run roughly...
|
A: |
350 engine |
June 16th, 2016 02:36:50 pm, posted by Gary Darrar |
|
|
A: |
|
A: |
350 engine |
June 17th, 2016 09:12:46 am, posted by Gary Darrar |
|
|
|
|
|
Q: |
Starting Issue 1955 Chevrolet BEL AIR |
May 20th, 2016 05:46:26 am, posted by Paul Amon |
Car starts and runs fine. When I try to start it after it has been running for awhile it will not start. I must let it sit for at least 10 minutes before it will start. Cannot figure out why....
|
|
|
|
Q: |
Car clubs 1981 Chevrolet CITATION X-11 |
May 11th, 2016 09:32:02 am, posted by james keys |
I was wondering if you could give me any
Into. On Chevy car clubs in the southern
Illinois area or close to? I would like to join one.
...
|
|
|
|
Q: |
1971 El Camino 1971 Chevrolet EL CAMINO |
April 15th, 2016 07:26:01 am, posted by Kevin canning |
I have the VIN # for a 71 El Camino. The car has SS emblems on the sides and front grille. However, the VIN # is 136801B110002 and everything I have read indicates that this VIN # doesn't match the...
|
A: |
SS El Camino |
June 16th, 2016 02:50:09 pm, posted by Gary Darrar |
|
|
|
|
|
Q: |
SOS - 1937 Chevy Master Deluxe 1937 Chevrolet MASTER DELUXE |
March 26th, 2016 01:45:30 pm, posted by Dean Basinger |
SOS! I am trying to find a car that my father, Galen Basinger, owned back in the early '70's. He was president at that time of the Three Rivers Car Club and unfortunately, lost his life in a car ac...
|
|
|
|
Q: |
Looking for a 1950s black sedan for a student film shoot 1954 Chevrolet BEL AIR |
March 22nd, 2016 03:02:12 pm, posted by Laurie Niles |
My son is a 15-year-old high school film student at LA County High School for the Arts, looking for a prop car for a film he is shooting this weekend in Pasadena. It would just be used as a backgroun...
|
|
|
|
Q: |
2002 Trailblazer LTZ 2002 Chevrolet BLAZER |
February 5th, 2016 09:27:21 pm, posted by Manon Pfluger |
Why isn't Trailblazer of any of the models listed? The Trailblazer LTZ is a limited edition of all the models. Then you have Trailblazer SS....
|
|
|
|
Q: |
roger fields 1974 Chevrolet EL CAMINO CLASSIC |
January 2nd, 2016 06:38:45 am, posted by roger fields |
7I would like to know what is the part number for the headlight retaining ring foe a 1974 elcamino? The car 7 " ring is different. Car ring the tabs are 6 5/8 apart Mine are 6 ,61/4, 7&qu...
|
|
|
|
Q: |
1950 chevy fleetline 1950 Chevrolet ACADIAN |
December 1st, 2015 02:49:28 pm, posted by Ruby Resendez |
What is the difference between a 1950 chevy delux 4 door fleetline and a 1950 chevy acadian 4 door fleetline...
|
|
|
|
Q: |
Information on 1968 Chevrolet Impala Speedometer Dash-Cluster 1968 Chevrolet IMPALA |
October 23rd, 2015 03:17:56 pm, posted by Darrell Woofter |
Hello:
This week, I have decided to repair, upgrade and restore the 1968 Chevrolet Impala speedometer dash/cluster/wiring.
I would appreciate any information, tech hints, parts, and assistance f...
|
|
|
|
Q: |
Lost Keys replacement without dismantling to access 1969 Chevrolet EL CAMINO SS396 |
October 12th, 2015 09:17:34 am, posted by Lawrence Danilow |
Hello
Does any one know of a locksmith service in Miami that can make the ignition key and door key for my elcamino without dismantling to gain access to the switch
It seems the locksmiths do...
|
A: |
Replace them |
October 12th, 2015 12:04:16 pm, posted by Michael Hoff |
|
|
A: |
|
A: |
|
|
|
|
Q: |
The Late great Chevy 1965 Chevrolet IMPALA |
August 22nd, 2015 03:08:39 am, posted by sjoerd hoogma |
Hi Fols,
this is Sjoerd from Europe, owner of a California Chevy Impala 65n 283 V8 engine
I like to look for parts. Most is for ex en interior.
I stumble up a dozen websites
What about The we...
|
|
|
|
Q: |
Help and-or Support 1934 Chevrolet 1/2 TON |
July 28th, 2015 10:33:11 am, posted by Richard Solomom |
I have been working on my 34 Chevy PU for 5 yrs now. I need a good body shop to help me with some of my body issues. I do not mind paying for my work but would like someone who is reasonable and wi...
|
|
|
|
Q: |
Help and-or Support 1934 Chevrolet 1/2 TON |
July 28th, 2015 10:33:06 am, posted by Richard Solomom |
I have been working on my 34 Chevy PU for 5 yrs now. I need a good body shop to help me with some of my body issues. I do not mind paying for my work but would like someone who is reasonable and wi...
|
|
|
|
Q: |
Help and-or Support 1934 Chevrolet 1/2 TON |
July 28th, 2015 10:33:00 am, posted by Richard Solomom |
I have been working on my 34 Chevy PU for 5 yrs now. I need a good body shop to help me with some of my body issues. I do not mind paying for my work but would like someone who is reasonable and wi...
|
|
|
|
Q: |
Help and-or Support 1934 Chevrolet 1/2 TON |
July 28th, 2015 10:32:55 am, posted by Richard Solomom |
I have been working on my 34 Chevy PU for 5 yrs now. I need a good body shop to help me with some of my body issues. I do not mind paying for my work but would like someone who is reasonable and wi...
|
|
|
|
Q: |
Looking for a restoration shop 1958 Chevrolet IMPALA |
June 28th, 2015 11:41:01 pm, posted by Jay Kachelhoffer |
We are new to the area, and looking for a solid restoration shop. My wife has a '58 Impala that she wants to restore to original. It was her grandfathers car that she rode in parades in with him. ...
|
|
|
|
Q: |
ls3 engines 1971 Chevrolet NOVA |
June 8th, 2015 10:00:04 am, posted by lisa coccimgilio |
I would like to know if there is a market for Novas with a ls3 motors.
I am buying a 1971 Nova and was thinking about swapping it out and need to know if there is a demand for it. I can't find ...
|
|
|
|
Q: |
2nd gen hood size 1974 Chevrolet MONTE CARLO |
May 29th, 2015 06:42:29 am, posted by Valentino Guillen |
Which year did the chevy monte carlo, had the biggest length hood, of the 2nd Generation Chevy monte carlo ? (1973-1977) (2nd gen)...
|
|
|
|
Q: |
want to add 2 4 barrels 1963 Chevrolet IMPALA SS |
May 11th, 2015 12:39:40 pm, posted by Frank Gossman |
Hi Guys : Question I have a crated 350ci motor that was put in the 63 impala now I have no history about the motor right now there is an edelbrock intake with a 4 barrel I would like to replace the i...
|
|
|
|
Q: |
lights dim 1963 Chevrolet IMPALA SS |
May 7th, 2015 12:44:59 pm, posted by Frank Gossman |
Hi Guys new on site: I have a question: On my 63 impala when I blow the horn what makes my lights go dim? Any help would be greatly appreciated and I'll say Thanks in advance!!!...
|
|
|
|
Q: |
Rebuilding a Chevrolet Camaro 1968 1968 Chevrolet CAMARO |
April 27th, 2015 03:20:56 am, posted by Robert Gannon |
We have found a 1968 Camaro in Afghanistan and are rebuilding it - we are struggling to find parts and are hoping to find a US company that can provide either a reconditioned engine or parts for the ...
|
|
|
|
Q: |
1935 to 1948 Chevy Windows 1940 Chevrolet CLASSIC |
April 26th, 2015 09:43:41 am, posted by Charles Claxton |
I have approximately 30-35 GM Glass boxes with windows (NIB) for 1935-1948 Chevy. I am not a collector so seeking individual(s) who is interested in buying these parts. Please reply, I have GM part ...
|
|
|
|
Q: |
Aftermarket A-C 1978 Chevrolet 1/2 TON |
April 2nd, 2015 11:26:07 am, posted by Tom Horstkamp |
Purchased a Aftermarket A/C system from Nostalgic A/C parts for my 78 C10 non A/C truck. I am looking for someone to install this for me. I live in Greenbelt MD and due to health issues am unable to ...
|
|
|
|
Q: |
Wiring for 67 Camaro 1967 Chevrolet CAMARO |
March 20th, 2015 12:29:01 pm, posted by Greg Casteel |
Hello, I just finished restoring a 1967 Camaro. I installed a Classic Industries wiring harness. Does anyone know a good mechanic to help me finish it off? Im having a headlight,turnsignal issue. I l...
|
|
|
|
Q: |
Classic Cars and WWII Veterans 1950 Chevrolet 5 WINDOW COUPE |
March 15th, 2015 07:05:46 am, posted by Michael Poulimas |
I am spearheading an effort for the Carmel 4th of July parade. To honor our WWII veterans, we are trying to reach out to classic car owners who would want to participate in the parade and have a WWI...
|
|
|
|
Q: |
700 R4 into a 65 Chevelle with small block 1965 Chevrolet CHEVELLE |
December 29th, 2014 08:32:31 pm, posted by Thomas Vehe |
I am putting a 65 Chevelle together and I am going to put a 700R4 overdrive transmission into it. Someone told me that I would have to make the tunnel modifications to do this. Can anyone tell me if ...
|
|
|
|
Q: |
How do I price a 1970 Chevy Custom C10 1970 Chevrolet C10 |
October 22nd, 2014 10:33:21 am, posted by Karen Dombrowski |
My father had a 1970 Chevy Custom C10 sitting in his driveway for about 20 years. He gave it to my nephew before he passed away and I am in charge of selling it for my nephew who is out of the count...
|
|
|
|
Q: |
Chevy owner 1976 Chevrolet CAPRICE CLASSIC |
October 6th, 2014 01:59:39 pm, posted by Floyd Huntington |
I purchased this car 22 years ago because it looked like new and had a Duel Fuel/gas-propane system. The car was placed in storage within weeks of purchase and was just taken out and listed on Kal...
|
|
|
|
Q: |
Data Plate Decode 1966 Chevrolet CHEVY II |
September 25th, 2014 06:15:21 pm, posted by David Bachhofer |
I'm having trouble decoding my data plate. I have a data plate on my 1966 chevy 11 SS that has the actual words style and trim, and not the abbreviations ST and TR. is this correct for a 66 model yea...
|
|
|
|
Q: |
what would be an estimated value on a 1964 impala 4 door 1964 Chevrolet IMPALA |
September 4th, 2014 11:41:02 pm, posted by e dodd |
this car is white four door with bluegreen interior. It has a 283 motor. I bought the car in 1989 in an estate sale i am the 2nd owner of it. It has never been wrecked and has no dents or dings. The ...
|
|
|
|
Q: |
1961 guidance needed ASAP 1961 Chevrolet CORVETTE |
September 4th, 2014 03:41:55 am, posted by Frank ODonnell |
I am fying out to Alamo, California this weekend to look at a 1961 Corvette 283 315 fuel injected car that I won on an auction site. I am a novice but love the 1961 Corvette. I need some quick help...
|
|
|
|
Q: |
QQ Registration in NJ 1969 Chevrolet CORVETTE |
July 21st, 2014 10:05:36 am, posted by George Vit |
Hello everyone I have been a classic car owner since 1995 and had QQ tags on my car. I recently sold the car and purchased a 1969 Corvette, I went to our local DMV to transfer ownership and register ...
|
|
|
|
Q: |
bell housing 1931 Chevrolet COUPE |
July 20th, 2014 06:33:03 pm, posted by Tom Sears |
Will my 194 bell housing bolt to a 1959 Chevy 235 engine?
If not what will ?
...
|
|
|
|
Q: |
Chevy be lair 1963 Chevrolet BEL AIR |
May 27th, 2014 05:23:40 am, posted by Stacey Jeanis |
Can anyone help me find out what to ask to sell a 63 bel air with 283 motor, 4 door, needs some body work, has all original trim, been kept in garage for 15 years?...
|
|
|
|
Q: |
1936 Chev master cylinder overhaul 1936 Chevrolet STANDARD |
April 4th, 2014 08:54:20 am, posted by Roy Kruger |
good day
I have a 1936 chev sedan standard, single chamber master cylinder.
I want to put new master cylinder kit onto the cylinder...question...can I remove the piston from the unit without having...
|
|
|
|
Q: |
North Ga Survivor Car Club 1976 Chevrolet CORVETTE |
March 24th, 2014 10:55:07 am, posted by Duane Hinkley |
Does anyone know of the club identified as The North Georgia Survivor Car Club? I am looking to connect with them for more information on their club. I am looking to get a "Certificate of Authentic...
|
|
|
|
Q: |
1923 Chevrolet 4 cylinder 4 door sedan 1923 Chevrolet 1 1/2 TON |
January 28th, 2014 03:39:41 pm, posted by Shirley Kirkland |
I have a 1923 Chevrolet 4 cylinder 4 door sedan and I need an complete overhaul on the motor..or I could buy a new engine if I had any idea where to look...I have found only one place in Texas that I...
|
|
|
|
Q: |
rechrome 1965 Chevrolet CORVAIR 500 |
December 10th, 2013 04:36:53 pm, posted by mel douglas |
where can I get bumpers and insigns rechromed ?...
|
|
|
|
Q: |
Tire size 1965 Chevrolet CHEVELLE |
November 3rd, 2013 12:33:17 pm, posted by Thomas Vehe |
What is the largest 14 or 15 inch tire that will fit into a 1965 Chevelle, without altering the fender well? I want to put a pair of 245 X 60 X 14 tires on the rear of the car....
|
|
|
|
Q: |
1957 chevy 1957 Chevrolet 210 |
September 22nd, 2013 09:45:21 am, posted by ron rose |
The 1957 chevy before I forget to say it was the vaccum hose for winshiedl wipper. do not know where the hsoe goes from the windshield motor and where does the hose goes, can not fiure it out and n...
|
|
|
|
Q: |
1957 2005 Chevrolet 210 |
September 22nd, 2013 09:41:21 am, posted by ron rose |
I have a 1957 chevy 283 engine and need a diagram or someone to show me where the vaccum hose goes from motor to where it goes, I just cann ot figure it out. coach_53me@yahoo.com...
|
A: |
RE: 1957 |
September 22nd, 2013 09:51:39 am, posted by Michael Hoff |
|
|
|
|
|
Q: |
1957 chevy 1957 Chevrolet 210 |
September 22nd, 2013 09:38:53 am, posted by ron rose |
|
|
Q: |
1937 Chevy Coupe Original Door 1937 Chevrolet COUPE |
September 17th, 2013 07:00:13 am, posted by Amy Hastings |
Hello,
I am looking for an original 1937 Chevy Coupe driver's side door.
Does anyone know where I can get one of these?
Thanks!
Amy...
|
|
|
|
Q: |
1964 4 DOOR cHEVY iMPALA 1964 Chevrolet IMPALA |
September 5th, 2013 08:31:28 am, posted by Tracia Davis |
I bought a 1964 Chevy 4 door The title state Impala. On the qiater panel it has Belaire. I am wondering is it a belaire or Impala? It has two rear tail lights. I am hoping it is like the title states...
|
|
|
|
Q: |
Richard Henningsen 1976 Chevrolet VEGA |
July 13th, 2013 09:18:49 am, posted by Richard Henningsen |
I am interested in a COSWORTH VEGA. Question: How did they destroke the standard Vega engine block to reach 2000CC? Did they install steel cylinder liners, as the stock (aluminum) block was prone ...
|
|
|
|
Q: |
Replacement Wheel Options for Lucille 1950 Chevrolet 1/2 TON |
April 9th, 2013 05:03:29 pm, posted by Mark Bloom |
I'd like to put modern P-metric tires on my 1950 1/2 ton Chevy 3100 PU. My objective is a safe daily driver without the expense of an IFS Mustang II or Pacer clip. Or buying bias ply tires from Coker...
|
|
|
|
Q: |
Engine 1936 Chevrolet MASTER DELUXE |
January 8th, 2013 03:52:14 pm, posted by Jeffrey Weyant |
I have a 1936 Chevy 4 door with the oringal engine. This engine has to be replaced. I was advised to use a engine from the 50's. What engine will fit, bolt and match up to the existing? And if it doe...
|
A: |
RE: Engine |
October 21st, 2013 06:28:48 pm, posted by David Hybner |
|
|
|
|
|
Q: |
Vin Number vs. Firewall Tag 1969 Chevrolet CAMARO |
January 6th, 2013 04:31:19 pm, posted by Lane Parker |
I have a 69 camaro and when i read the firewall tag, it said the original motor in it was a V8, but when i checked the Vin Number, it said that the original motor was a 6 cylinder. Which one do i bel...
|
|
|
|
Q: |
Power brake booster rod adjustment 1970 Chevrolet NOVA |
December 3rd, 2012 01:33:32 pm, posted by Matt Waller |
I just installed a power brake booster on my nova after converting from 4 wheel drum brakes to 4 wheel disk. The only problem I have encountered is the Rod that goes through the firewall and threads ...
|
|
|
|
Q: |
starting problem 1989 Chevrolet CORVETTE |
October 6th, 2012 05:10:13 pm, posted by Darwin Snyder |
My car cranks for a long time before starting spits and pops when cold. when its warmed up it starts quick sometimes but not all the time.where should i start troubleshooting?...
|
A: |
Fuel |
October 8th, 2012 07:18:56 pm, posted by Michael Hoff |
|
|
A: |
|
|
|
|
Q: |
wiring harness 1935 Chevrolet MASTER DELUXE |
August 3rd, 2012 06:28:50 pm, posted by baldwin alan |
im looking for a new complete wiring harness w/ turn singles . i need a harness not an orginal copy just 1 thats has it all i only found the filling station one ,nice but$$$ anybody cheaper...
|
|
|
|
Q: |
Brakes 1972 Chevrolet IMPALA |
July 31st, 2012 05:12:21 pm, posted by Doug Herman |
I just had the master cylinder replaced on my 72 Impala Custom convertible due to a leak between the back of the master cylinder and the brake booster. I trust the mechanic, however, the brakes are ...
|
|
|
|
Q: |
Value of my car 1967 Chevrolet CAMARO SS |
June 29th, 2012 08:23:44 pm, posted by Dick Olin |
I have a 1967 Camaro SS Convertible. I was wondering if this would be a good time to sell my car or should I wait. The blue book indicated the low $10,600, average $24,600, high 45, 600. I've been...
|
|
|
|
Q: |
Rear veiw mirror with chain wind up clock 1935 Chevrolet 3 WINDOW COUPE |
May 28th, 2012 04:25:59 pm, posted by Dave Decker |
Greetings
Some friends of ours were cleaning out their Grandmothers house and they found an old rear view mirror with a wind up clock in the lower right hand corner. The clock was wound with a chain...
|
|
|
|
Q: |
Shocks and Leaf springs on 1948-9 Chevy Panel truck 1948 Chevrolet PANEL |
May 20th, 2012 02:27:47 am, posted by Larry the Woodson |
I have original lateral shocks on 1949 Panel Chevy 1/2 ton.......cost is about the same to replace them with modern vertical upgrade kits and shocks. Everything else is original.
2. Go with rep...
|
|
|
|
Q: |
Engine and bay color 1949 Panel Chevy 1948 Chevrolet PANEL |
May 20th, 2012 02:20:49 am, posted by Larry the Woodson |
Gentelmen Please: What color is the engine painted, also is it the same color for the engine well and firewall.
Thank You for your time and energy to help me get this correct, Larr...
|
|
|
|
Q: |
charlie 1931 Chevrolet STANDARD |
April 19th, 2012 08:50:17 am, posted by charles sciame |
Where can I find a 42 " front sway bar to fit my 1931 chevy, I had ordered one from Chassis Engi.reening but it was an inch and a half too big. I have a mustang two front end .
...
|
|
|
|
Q: |
Just bought for $7500 with 75000 miles w... 1989 Chevrolet CORVETTE |
March 11th, 2012 09:41:48 pm, posted by DARWIN SNYDER |
Just bought for $7500 with 75000 miles was that a good deal 89 corvette L98...
|
A: |
REPLY |
March 11th, 2012 10:32:15 pm, posted by Ragen Rat |
|
|
|
|
|
Q: |
Drum to disc brakes 1969 Chevrolet CAMARO |
January 22nd, 2012 12:20:03 pm, posted by penny douglas |
Finally starting restoration on my stock '69 Camaro. Changing from drum to disc brakes. Want to replace hubcaps with exact original hubcaps that came with car when new. Will that style still fit wh...
|
|
|
|
Q: |
cooler fan switch 1984 Chevrolet CORVETTE |
November 11th, 2011 10:38:25 pm, posted by Joe Kroboth |
On my 84 vette,the stock single fan turns on at a whopping 232 degrees,then off again at around 195 degrees.I think this is alittle too high.In the summertime,I feel things could getr worse in stuck ...
|
|
|
|
Q: |
1984 corvette sun shades 1984 Chevrolet CORVETTE |
November 11th, 2011 10:13:58 pm, posted by Joe Kroboth |
Can you guys hook me up with 2 front window sun shades(Red)for my 1984 corvette coupe?With all the mounting hardware?Yes,I can get them from some of the corvette mags,but perhaps you can get them che...
|
|
|
|
Q: |
chevelle 1970 Chevrolet CHEVELLE |
September 2nd, 2011 09:53:04 am, posted by bert brown |
I bought a 1970 chevelle 454 ss. The car is mostly original but the engine code tells me it is a truck engine. Should I try and replace the engine with one that is of the proper year or drop a crate...
|
|
|
|
Q: |
Holly 600CFM Carburator 1956 Chevrolet BEL AIR |
August 25th, 2011 03:05:11 pm, posted by Craig Cole |
I bought a Holly 600 Elec Choke Vacuume secondarys. The guy installing it cant use any of the adapter plates the parts company sent. I brought 3 to him and he says none of them will work? ANyone know...
|
|
|
|
Q: |
Engine Running Hot 1956 Chevrolet BEL AIR |
August 2nd, 2011 06:19:59 pm, posted by Craig Cole |
Temperature runs 3 quarters towards hot on the dummy guage. I have replace the thermostat with 160 degree and new anti-freeze and still is running warm. Any ideas? Help!...
|
A: |
Running hot |
August 6th, 2011 11:20:24 am, posted by Mark Henning |
|
|
A: |
|
A: |
|
|
|
|
Q: |
back fire thru carb 1935 Chevrolet MASTER |
July 15th, 2011 12:16:37 pm, posted by baldwin alan |
i have tried everything to stop this it dosnt happen through the exhaust just thru the carb help!!!...
|
|
|
|
Q: |
Registration records search 1966 Chevrolet CHEVELLE MALIBU |
June 14th, 2011 09:04:21 am, posted by Don Hauge |
I recently found some news about our 66 Chevelle Malibu. It seems that someone in the past modified the car to tow a 5th wheel trailer loaded with posts and poles!? I had heard that rumor previously ...
|
|
|
|
Q: |
please help 1987 Chevrolet R10 PICKUP |
April 13th, 2011 06:58:22 pm, posted by will camp |
truck will crank but wen i turn key fuel pump will not come on and i just replaced it ? wats my problem , ecm ,fuel relay??...
|
|
|
|
Q: |
remote oil filter system 1951 Chevrolet BEL AIR |
March 23rd, 2011 04:42:59 pm, posted by donald romaca |
were can i find a remote oil filter system for a 1951 chevy belair 6 cylender...
|
A: |
Remote filter |
April 2nd, 2011 09:40:14 am, posted by Mark Henning |
|
|
|
|
|
Q: |
points 1951 Chevrolet BEL AIR |
March 23rd, 2011 12:39:39 pm, posted by donald romaca |
i have a 1951 chevy belair deluxe 216 6 cylender need to know what to set the point gap at...
|
|
|
|
Q: |
cosworth vega 1975 Chevrolet COSWORTH VEGA |
March 8th, 2011 09:13:09 pm, posted by Ronnie Taggart |
could anyone please lead me into the right direction. im trying to get a part for a 1975 cosworth vega im looking for the timing belt. if anyone could please contact me with info i would you appricat...
|
|
|
|
Q: |
registering a car club 1978 Chevrolet CAMARO |
October 14th, 2010 04:32:02 pm, posted by juan (johnny) sepulveda |
hello my name is johnny ,im interested in starting a car club , would like to get information on how i could do that ,i do have a couple of cars and a name , thank you...
|
|
|
|
Q: |
generators 1967 Chevrolet CAMARO |
September 3rd, 2010 06:40:03 pm, posted by Dana Kidd |
who in the area can convert a 6v starter and generator to a 12v system?...
|
A: |
6 to 12 |
September 11th, 2010 05:29:47 pm, posted by Mark Henning |
|
|
|
|
|
Q: |
Parking Brake Not Working 1966 Chevrolet EL CAMINO |
July 6th, 2010 06:57:25 am, posted by Dianne Edwards |
My parking brake is not working. It doesn't release and it doesn't hold. I was thinking that I needed to replace the entire park brake assembly but when I look for the part I find nothing. I do fi...
|
|
|
|
Q: |
wayne 1967 Chevrolet CHEVELLE |
June 16th, 2010 06:02:47 am, posted by wayne garcia |
I have a 396 chevelle ss 138 and want to buy a mini high torque starter. I asked which one to buy based on the teeth on the flywheel, and they said in-line is one and staggered is another. The questi...
|
|
|
|
Q: |
1968 step van 1968 Chevrolet 1/2 TON |
June 9th, 2010 11:13:26 pm, posted by Harold keever |
Hi need help .have a 68 Chevy p10 step van with little later motor i believe to be a 292 w electronic ignition 3 speed trans - early to late 70s , washed motor that morning took to shop were they re...
|
|
|
|
Q: |
454 into a 1984 montecarlo ss 1984 Chevrolet MONTE CARLO SS |
May 7th, 2010 01:35:13 am, posted by michael wilson |
please tell me how and what will i need to put a 454 into my 1984 montecarlo ss ?...
|
|
|
|
Q: |
Monte Carlo Question! 2004 Chevrolet MONTE CARLO SS |
April 28th, 2010 06:28:27 pm, posted by James Crews |
I have a 2004 Monte Carlo SS (SuperCharged) Dale Jr. Edition signature edition.Would like to find out what production model # this car is. I found through other websites that G.M. only made 2883 of t...
|
|
|
|
Q: |
Metal side window inserts 1955 Chevrolet SEDAN DELIVERY |
April 25th, 2010 08:01:56 pm, posted by gus lipscy |
Are their any manufacturers reproducing the side window inserts for s 55 sedan delivery?
Thanks Gus...
|
|
|
|
Q: |
Powerglide Trans Question 1967 Chevrolet IMPALA SS |
April 16th, 2010 12:24:46 pm, posted by Tom Mackson |
Hello,
I new to this community. I have a 67 Impala SS convertible in great shape. It has the factory two speed powerglide in it that shifts so smoothly all you can hear is the engine changing rpms...
|
A: |
Tom... |
April 16th, 2010 08:41:06 pm, posted by Joseph Montenegrino |
|
|
|
|
|
Q: |
chevrolet 1956 Chevrolet 150 |
April 2nd, 2010 08:18:12 pm, posted by Robert Lehmann |
What is the best way and least expensive to raise the rear end of the 56 Chevrolet? Besides spindles, what else will the lower the front of the 56 Chev? bob lehmann...
|
A: |
Springs |
April 3rd, 2010 03:54:05 am, posted by Darren Short |
|
|
|
|
|
Q: |
Hello,
I am new to your site and would ... 1940 Chevrolet SPECIAL DELUXE |
March 25th, 2010 11:32:40 am, posted by Bill Barnett |
Hello,
I am new to your site and would like to get to know some of you motorheads....I have a question for you , I have a 1940 chev convert that the wooden rear bow has rotted away and I need all of...
|
|
|
|
Q: |
Confederate Chevrolet ? 1932 Chevrolet ANTIQUE |
March 16th, 2010 07:02:35 pm, posted by skip mueller |
I found a 1932 four door,dual side mount, cowel/fender lights, chrome engine louvers, mo-hair interior with shades. Appears complete and original.Garaged for years. Has surface rust but appears solid...
|
|
|
|
Q: |
value 80 El camino 1980 Chevrolet 1 1/2 TON |
March 10th, 2010 03:41:39 pm, posted by Frank Carignan |
Im need to find out the value of 1980 El camino V6 229 Three speed on the floor execelent condition...
|
A: |
Hey Frank... |
March 21st, 2010 07:41:57 am, posted by Joseph Montenegrino |
|
|
A: |
|
|
|
|
Q: |
Carberator 1974 Chevrolet C60 |
March 4th, 2010 12:25:41 pm, posted by David New |
I'm putting new heads and a four barrel intake on a 350, I would like to know if I can use a quadrajet thats designed for an automatic in a standard shift, and if so what changes will I need to make...
|
|
|
|
Q: |
other vin stamps 1972 Chevrolet CAMARO SS |
February 27th, 2010 09:56:54 pm, posted by john keller |
Iam looking to verify the vin on a 1972 camaro ss ,have checked the one under the heater /fan blower box is there any more
john...
|
|
|
|
Q: |
1968 p10 step van 1968 Chevrolet 1/2 TON |
February 24th, 2010 10:03:21 am, posted by Harold keever |
Hi, i'm looking at buying a 1968 step van says its a p10 1/2 ton but also says it has 6 lug wheels could this still be a p10 half ton or is he mistaken some people just don't look at emblems they jus...
|
A: |
Its a half ton |
February 24th, 2010 06:13:16 pm, posted by Michael Hoff |
|
|
A: |
|
|
|
|
Q: |
interior 1940 Chevrolet MASTER DELUXE |
February 22nd, 2010 08:09:57 pm, posted by jim johnson |
i need to know what was the original interior
.and where to find it...
|
A: |
interior |
February 22nd, 2010 08:49:03 pm, posted by David Rosenberg |
|
|
|
|
|
Q: |
water spots 1988 Chevrolet CORVETTE |
February 18th, 2010 06:08:45 am, posted by richard ponte |
the 1988 corvett has water stains on hood & deck lid. is there any product out there to remove them, they are old water spots...
|
A: |
Check out... |
February 18th, 2010 12:32:13 pm, posted by Joseph Montenegrino |
|
|
|
|
|
Q: |
not sure 1993 Chevrolet CAMARO Z28 IROC |
February 13th, 2010 08:02:46 pm, posted by Paul Durnin |
My friend has a 1993 Camaro z28-iroc four speed auto and we are unsure if it has the 305 H.O. or if it has the 350 small block or plain 305???...
|
A: |
According to... |
February 18th, 2010 12:37:33 pm, posted by Joseph Montenegrino |
|
|
|
|
|
Q: |
1935 chevy tudoor sedan master delux 1935 Chevrolet SEDAN |
January 25th, 2010 05:15:28 pm, posted by Jerry Young |
I'm looking for eigther replacement doors or new wood or paterns for the door wood for my 1935 chevy tudor sedan master delux with suicide doors...
|
|
|
|
Q: |
Richard Ponte 1988 Chevrolet CORVETTE |
January 21st, 2010 09:32:15 am, posted by richard ponte |
when vehicle first starts in morning when cold, starts instanly, When it has run for awhile & reaches 193
degrees & shut down, After about 10-15 minutes when starting it again it takes 5...
|
A: |
EFI troubles |
January 21st, 2010 06:36:47 pm, posted by David Rosenberg |
|
|
|
|
|
Q: |
DASH VIN NUMBER 1970 Chevrolet CHEVELLE SS396 |
January 9th, 2010 11:24:32 am, posted by TOM VIGNOLA |
Back in 2008, after losing my original vin # tag, I had asked about getting a new vin for my Chevelle...well after going crazy looking thru old parts and nuts and bolts, my brother decided to remove ...
|
|
|
|
Q: |
front end??? 1940 Chevrolet SPECIAL DELUXE |
November 29th, 2009 08:18:15 pm, posted by Ricky Branum |
i just bought a 1940 chevy special deluxe and have been in the process of tearing it completely down to get ready for possible acid dipping. My question is, I want to modernize the front axles. I wan...
|
|
|
|
Q: |
1987 chevy r10 1987 Chevrolet R10 PICKUP |
November 16th, 2009 11:56:26 am, posted by richard lemus |
ok this is my question I purchased a 1987 sib Chevy up I got all happy when I purchased it was what I was looking for 1987 short bed fuel injected all power options that I can drive & slowly wor...
|
|
|
|
Q: |
1932 Chevy VIN plate 1932 Chevrolet CONFEDERATE |
October 21st, 2009 03:32:55 pm, posted by Pete Blair |
Does any one know where I can see a pic of this VIN plate, or can someone give me a GOOD discription of it? (dimentions, what it says on it)...
|
|
|
|
Q: |
1957 chop restore or original 1957 Chevrolet SEDAN |
October 15th, 2009 11:29:15 am, posted by joseph littleton |
I just bought a 57 4door that runs and is supose to be all original. It needs work though and I need to know if its worth going the extra mile and try to keep it original or just chop it with fuel i...
|
|
|
|
Q: |
3 speed manual transmission with overdrive 1962 Chevrolet IMPALA |
September 19th, 2009 08:24:16 pm, posted by harry parducci |
I have a 1962 chevy impala with a speed manual transmission with overdrive. What my question is, how many chevy impala's came out with said trans. in 1962.
My VIN# is 21847L188234...
|
|
|
|
Q: |
mark 1975 Chevrolet C60 |
August 25th, 2009 06:34:03 pm, posted by mark johnson |
how does the vacuum break booster work on a 1975 chevy C60 truck?...
|
|
|
|
Q: |
steering 1955 Chevrolet BEL AIR |
August 23rd, 2009 06:06:10 pm, posted by don hirtle |
i thought i had a 605 steering box but when i purchased one it would not fit ,as im driving i have to fight her to keep it going strait ,i have a front sway bar ,new shocks ,and its been realigned so...
|
|
|
|
Q: |
drive train 1955 Chevrolet BEL AIR |
August 23rd, 2009 05:58:22 pm, posted by don hirtle |
hello i have a 55 belair and its very quick off the line but seems to reach a certain speed[120 klms] and doesn,t like to go much faster i have a 350 small block with i believe a 350 tranny i do not ...
|
|
|
|
Q: |
Quadrajet 1979 Chevrolet 1/2 TON |
August 23rd, 2009 10:16:32 am, posted by Shane Patterson |
I was wondering if the quadrajet on my 350 which is actually out of a 77 Chevy pick up is a dual intake carb? There is a hard fuel line that comes off the back of the carb, but it goes nowhere. I was...
|
|
|
|
Q: |
selling a body of 1980 chevy pickup 1980 Chevrolet 1/2 TON |
June 26th, 2009 04:28:19 am, posted by britney dulany |
Hi, this was a project truck we have run out of money to continue working on. We have the majority of the bodywork done on it , new door panels, firewall restored, and the rust treated. We just would...
|
|
|
|
Q: |
changing out motors 1994 Chevrolet 1500 |
June 26th, 2009 04:23:19 am, posted by britney dulany |
hi, My question is, would it be possible to put a 355 engine into a 1994 pickup? I was told it wasn't possible, but can imagine why it wouldn't work being that what is in it now is a 350. thanks Brit...
|
|
|
|
Q: |
going price 1982 Chevrolet 3/4 TON |
June 22nd, 2009 03:32:45 pm, posted by don sndrs |
im lookin at a 1982 chevy 3/4 ton single cab grey its a little rough it has a inline 6 292 and a 2 barrell carb has a crack in the windshield no reverse lites but all other lites work has a 3 speed t...
|
|
|
|
Q: |
truck parts 1972 Chevrolet 1/2 TON |
June 5th, 2009 06:01:17 pm, posted by chris ayala |
Looking for a rust free cab for a 1967-1972 Chevy pickup.Somewhere close to Nebraska.Thank you....
|
|
|
|
Q: |
1967 Chevrolet El Camino 1967 Chevrolet EL CAMINO |
May 19th, 2009 07:59:48 am, posted by John Reynolds |
I have tried several times to upload my picture for my listing in the correct format but it will not work.
I have uploaded pictures before and had no problem....
|
|
|
|
Q: |
235 engine 1951 Chevrolet SEDAN |
May 14th, 2009 09:40:48 am, posted by roy villegas |
I bought a 235 engine for my 51 chevy. The car it came out of is a 55-58? The engine numbers on the block dont tell me the year .Is there a book that tells this information? Thank You....
|
|
|
|
Q: |
Help! 1973 Chevrolet CAMARO SS (SLP) |
May 13th, 2009 12:28:38 am, posted by Glenda Frame |
I have a 1973 Chevy Camero RS/LT (I think) with a 502 in it. I would like to sell it but don't know what to ask for it. It was a project car that my husband and I bought in 1994 and worked on with...
|
A: |
73 Camaro |
May 13th, 2009 06:05:06 am, posted by Chris Mikos |
|
|
A: |
RE: Help! |
May 13th, 2009 06:42:57 am, posted by Michael Hoff |
|
|
|
|
|
Q: |
U - JOINT EATER!! 1965 Chevrolet IMPALA SS |
April 30th, 2009 12:41:16 pm, posted by Mike Peach |
I HAVE A 65 IMPALA SS THAT HAS STARTED EATING REAR U JOINTS. THEY DON'T LAST TWO WEEKS. THE CAR HAS THE ORIGINAL 396 (BUILT TO ABOUT 400 HP) AND MUNCIE 4 SPEED BACK IN IT. EVERYTHING ELSE WORKS FINE...
|
|
|
|
Q: |
Dress up survivor? 1967 Chevrolet CORVETTE |
April 11th, 2009 08:55:07 am, posted by Duane Weldon |
Survivor 67 Corvette Coupe 39k original miles. 327/300hp Verygood to excellent condition, not restored. Want to replace original steel valve covers and perhaps intake manifold with aluminum. Is this ...
|
A: |
Hey Duane |
April 11th, 2009 04:18:02 pm, posted by Joseph Montenegrino |
|
|
A: |
Thanks |
April 13th, 2009 06:25:06 pm, posted by Duane Weldon |
|
|
A: |
|
A: |
|
A: |
|
|
|
|
Q: |
1964 corvette grand sport 1964 Chevrolet CORVETTE GRAND SPORT |
February 27th, 2009 10:36:23 am, posted by Randell Rovira |
I have a 1964 Corvette GS roadster. The car was one of 12 made from the original molds by an Ohio corvette company. The car is a 1964 corvette with the HI-Po 327 engine. Does anyone know the value of...
|
A: |
Hey Randall... |
March 5th, 2009 07:58:13 am, posted by Joseph Montenegrino |
|
|
A: |
Car Value |
July 10th, 2009 11:45:02 am, posted by Roger Kirk |
|
|
|
|
|
Q: |
I am looking for rear fender patch panel... 1981 Chevrolet EL CAMINO |
February 15th, 2009 05:54:08 pm, posted by Dave Stoewer |
I am looking for rear fender patch panels for a 1981 El Camino.I need both sides before and after wheel well....
|
|
|
|
Q: |
How to find an old friend 1969 Chevrolet CAMARO |
January 24th, 2009 12:34:03 pm, posted by Gene Romo |
Now that I'm getting up in the years, and retired, I've found myself wondering ; "What ever happened to my old 69 Camaro ? " It was nothing special, certainly not by today's standards , but...
|
|
|
|
Q: |
Looking For 1960 Chevrolet BEL AIR |
January 22nd, 2009 08:32:43 pm, posted by chris ayala |
I am looking for the 1/4 chrome that goes from the arrow to the taillights for a 1960 chevy belair 2door hardtop. It is only a single piece of chrome on the 1/4 panel,not the double.Any information w...
|
A: |
Hey Chris... |
January 26th, 2009 08:15:29 am, posted by Joseph Montenegrino |
|
|
|
|
|
Q: |
getting awfully annoyed at my borg warner rearend 1988 Chevrolet CAMARO Z28 IROC |
January 18th, 2009 10:53:33 am, posted by Christopher McCallister |
I have a 1988 iroc-z I need to replace the axle on. It is a borg warner 7.75 inch. It has a posi and I do not know how to get to the c-clip to slide the axle out. Any help would be appreciated. Thank...
|
A: |
88 IROC AXLE |
February 2nd, 2009 08:37:24 pm, posted by Chris Mikos |
|
|
|
|
|
Q: |
How to read a VIN# 1970 Chevrolet EL CAMINO SS |
January 16th, 2009 09:44:07 am, posted by Patrick Beasley |
Can I tell by the VIN# If my El Camino is a true SS. What do the numbers mean? Thanks...
|
A: |
Hey Patrick |
January 16th, 2009 01:55:31 pm, posted by Joseph Montenegrino |
|
|
A: |
Thanks |
January 18th, 2009 02:58:38 pm, posted by Patrick Beasley |
|
|
|
|
|
Q: |
how maney 1938 sedan deliverys were made... 1938 Chevrolet SEDAN DELIVERY |
January 15th, 2009 06:08:58 pm, posted by eddy hyder |
how maney 1938 sedan deliverys were made. i have a real nice one and dont know if i want to restore or hot rod . i want to rod if not to rare....
|
|
|
|
Q: |
had a house fire a year ago lost all inc... 1957 Chevrolet DEL RAY |
October 19th, 2008 06:07:35 am, posted by cathy rhodes |
had a house fire a year ago lost all including all files on my 57 chevy del ray and 67 valient have to sell my babies to start my life over at 47 yrs old didnt switch titles over before fire lost nee...
|
|
|
|
Q: |
Beretta 1989 Chevrolet BERETTA |
July 29th, 2008 10:15:10 pm, posted by Graham Dubourdieu |
I have a limited question to a rather basic vehicle, my wife has a 1989 Chevy Beretta that I require the fuel and brake lines on, I know they were a recalled Item but were never replaced and I need t...
|
A: |
Graham... |
August 12th, 2008 06:40:57 am, posted by Joseph Montenegrino |
|
|
|
|
|
Q: |
1973 chevy truck ac fan high speed not working 1973 Chevrolet 1/2 TON |
July 15th, 2008 07:20:04 pm, posted by roy dill |
I have a 1973 Chevy Cheyenne Super and the high fan does not work on the air/ heater switch. I can't seem to figure out what's bad! The lower 3 speeds work but when I switch to the 4th or high the fa...
|
|
|
|
Q: |
I was wondering how much a 1957 Bermuda ... 1957 Chevrolet ANTIQUE |
July 1st, 2008 01:50:34 pm, posted by Dawn Miller |
I was wondering how much a 1957 Bermuda Specil Chevrolet truck model 3200 in original condition would be worth....
|
|
|
|
Q: |
Cylinder Head Torque 1933 Chevrolet MASTER DELUXE |
April 20th, 2008 05:09:24 pm, posted by Ron Montgomery |
I would Like to know the cylinder head torque on 217 cu.in. engine...
|
|
|
|
Q: |
Bead Blasting vs Sanding 1951 Chevrolet 1/2 TON |
April 11th, 2008 12:26:11 pm, posted by Myron Fay |
I am going to remove the paint down to bare metal as part of my restoration project. Debating on bead blasting versus power sanding. Looking for comments and/or recommendations....
|
|
|
|
Q: |
1951 Chevy 100 Wiper Assembly 1951 Chevrolet 1/2 TON |
March 27th, 2008 01:15:07 pm, posted by Myron Fay |
Loking for a picture of the wiper assembly for a 1951 Chevy 1/2 ton pickup. I think I have all the parts, just not sure how it all comes together....
|
|
|
|
Q: |
camaro 1979 Chevrolet CAMARO |
January 21st, 2008 04:40:51 am, posted by paul ronald hosking |
hi joey havent answered me yet you must be bizzy got to go just a quick message here from you soon pauly tasmania australia i no i seem pushy but trying to find details see ya mate...
|
A: |
Hey Pauly... |
February 12th, 2008 04:36:45 pm, posted by Joseph Montenegrino |
|
|
A: |
z28 camaro |
April 4th, 2008 05:29:53 pm, posted by paul ronald hosking |
|
|
A: |
camaro z28 1978 |
September 22nd, 2008 05:27:06 am, posted by paul ronald hosking |
|
|
|
|
|
Q: |
67 Camaro hood inserts 1967 Chevrolet CAMARO RS/SS |
January 18th, 2008 06:29:06 am, posted by Dale Krehbiel |
Recently the announcer at Barrett-Jackson stated that, relative to the 67 Camaro RS;/SS hood, the 4 stack insert indicated a big block car while the grill shaped the hood insert indicated a small bl...
|
A: |
|
A: |
|
A: |
67 Camaro |
March 27th, 2008 06:27:18 am, posted by jim mothershead |
|
|
|
|
|
Q: |
camaroz28 1979 Chevrolet BERETTA |
January 18th, 2008 03:48:48 am, posted by paul ronald hosking |
good day joey i have just become the owner of 1979 z28 black and gold turbo charged350 350auto is or would you no if this is factory option or an add on later i will have it in tasmania australia in ...
|
|
|
|
Q: |
VIN ON DASH 1970 Chevrolet CHEVELLE SS396 |
January 2nd, 2008 06:01:43 pm, posted by TOM VIGNOLA |
I purchased a numbers matching SS Chevelle from California about 4 years ago..it is complete with original 8 track player....
and I was given the sheet that shows where car was purchased and optio...
|
A: |
oh no... |
January 5th, 2008 03:04:43 pm, posted by Joseph Montenegrino |
|
|
A: |
VIN plate |
March 27th, 2008 06:33:44 am, posted by jim mothershead |
|
|
|
|
|
Q: |
window molding 1956 Chevrolet DEL RAY |
December 12th, 2007 02:50:12 pm, posted by MARK KING |
i need tool to remove molding form windows or were i can get one.
mahalo mark...
|
A: |
Did you try... |
January 8th, 2008 03:30:24 pm, posted by Joseph Montenegrino |
|
|
|
|
|
Q: |
5 Lug conversion 1962 Chevrolet NOVA |
November 17th, 2007 09:11:45 am, posted by Shane Patterson |
What other car could I take the front spindles off of to use on my 62 to convert it from 4 lug to 5 lug?...
|
|
|
|
Q: |
Getting a TITLE 1956 Chevrolet PICKUP |
September 21st, 2007 05:24:33 am, posted by G Taylor |
This is directed to anyone familiar with Ontario MTO or DOT laws... I\'m considering buying a 1956 Chev P/U cab, without a title. If you have done this before, What do I need, in order to get a new ...
|
|
|
|
Q: |
NEED A 1963 C10 GRILL 1963 Chevrolet 1 1/2 TON |
August 29th, 2007 07:09:11 pm, posted by ORLANDO BETANCOURT |
IM LOOKING FOR A 1963 TO 1966 ALUMINUM GRILL? MY EMAIL IS MADEPR@AOL.COM...
|
A: |
Orlando... |
August 30th, 2007 05:54:09 am, posted by Joseph Montenegrino |
|
|
|
|
|
Q: |
Shifter 1967 Chevrolet CAMARO |
August 27th, 2007 09:00:46 am, posted by Donald Pickard |
Have a 1967 Chevrolet Camaro which started out life as a 6 cylinder car. It now has a 350 v8 installed but the transmission continues to be a three speed manual. The car came with a floor shift tha...
|
A: |
Donald... |
August 29th, 2007 06:18:30 am, posted by Joseph Montenegrino |
|
|
A: |
RE: Shifter |
August 30th, 2007 11:46:26 am, posted by Donald Pickard |
|
|
|
|
|
Q: |
secondary vacuum pump 1955 Chevrolet 1 1/2 TON |
July 23rd, 2007 11:13:11 am, posted by Larry Storment |
I just installed a secondary vacuum pump on my p/u to help the power brake booster. there was no instructions as to where to put the exhaust portion of the pump, should it just go to atmosphere or ba...
|
A: |
|
A: |
|
A: |
vac pump |
July 24th, 2007 03:14:13 pm, posted by Larry Storment |
|
|
A: |
My mechanic... |
July 26th, 2007 10:17:25 am, posted by Joseph Montenegrino |
|
|
A: |
vac pump |
July 26th, 2007 12:14:50 pm, posted by Larry Storment |
|
|
|
|
|
Q: |
oil bath element 1949 Chevrolet 235 |
July 16th, 2007 01:49:55 pm, posted by deborah bellafonte |
Let me rephrase that.....I need an oil bath element for the air intake. I have a 235 in a 1949. Thanks...
|
|
|
|
Q: |
oil bath air filter elements 1949 Chevrolet 235 |
July 16th, 2007 01:39:00 pm, posted by deborah bellafonte |
I cannot find a distributor for and oil bath air intake filter for my 235 Chevy engine. The truck is a 1949 truck....
|
|
|
|
Q: |
HORN ASSY. 1957 Chevrolet BEL AIR |
June 16th, 2007 12:26:37 pm, posted by GENE MILLS |
WHERE CA N I FIND THE HORN ASSY. FOR 57 CHEVY. I HAVE AN ASSY. MANUAL, BUT IT IS NOT IN IT....
|
A: |
RE: HORN ASSY. |
June 16th, 2007 04:34:15 pm, posted by Joseph Montenegrino |
|
|
A: |
or ... |
July 16th, 2007 01:51:50 pm, posted by deborah bellafonte |
|
|
A: |
Horn Assembly |
September 12th, 2007 09:08:08 pm, posted by Ron Townsend |
|
|
|
|
|
|
|
Join the Classic Car Community! Its absolutely 100% FREE! |
Add My Service Search for restoration shops and classic car dealerships in your area |
View our Car Clubs and register your car club today! |
Find books on Classic Cars here |
Find your Classic Car in our Encyclopedia! |
|